Products

PRODUCTS

5.8G 5KMFull Gigabit Wireless Bridge Parameters

5.8G outdoor wireless CPE series products can realize point-to-point and point-to-multipoint long-distance wireless transmission,which can meet the demand for long-distance wireless coverage in large and open environment such as elevators,mountainous areas,factories, construction sites,piers,tower cranes,parks,squares and so on.With only one operator access cost, you can enjoy high-quality wireless network coverage in multiple places,which can realize long-distance video surveillance data transmission back to the scattered distribution of video surveillance,unified in the monitoring center for real-time viewing and centralized management.

Category:

E-mail:

Introduction

5.8G outdoor wireless CPE series products can realize point-to-point and point-to-multipoint long-distance wireless transmission,which can meet the demand for long-distance wireless coverage in large and open environment such as elevators,mountainous areas,factories, construction sites,piers,tower cranes,parks,squares and so on.With only one operator access cost, you can enjoy high-quality wireless network coverage in multiple places,which can realize long-distance video surveillance data transmission back to the scattered distribution of video surveillance,unified in the monitoring center for real-time viewing and centralized management.

Features

◆Adopting industrial-grade overall chip solution,8M NorFash,64M memory;
◆High transmit power,5.8G external unidirectional antenna 12DBi,built-in power 19DBm;
◆Support AP/relay mode,support DHCP way/static configuration way to get IP address;
◆Fat and thin AP integration,support equipment local WEB management;
◆POE interface,support 24V non-standard POE power supply,DC power supply (interface support DC8V-24V);
◆ Camera distribution location to the monitoring center to form the angle less than 60 degrees,you can consider the point-to-multipoint,reduce the transmitting end of the bridge to reduce costs but the prerequisite to meet the angle and demand.

Technical Parameters

main characteristic	5G operating bands:	5180MHz-5805MHz	5G WIFI Transmission Protocol.	802. 11a/n/ac
	FLASH：	8MB	Programs:	MTK
	Built-in antenna:	Directional Flat Antenna, Gain: 14dBi	Maximum wireless rate:	900Mbps
	5G EVM：	802. 11a:≤-25dB; 802. 11n:≤-28dB; 802. 11ac:≤-32dB;
	Frequency bias:	±10ppm	Press the button:	reset button (press and hold for 6-10 seconds to restore factory default configuration)
	Interface:	LAN0/POE：10/100/1000Mbps；LAN1 ：10/100/1000Mbps
	Status Indicator:	Power Lamp, LAN1 Port Lamp, LAN2 Port Lamp, System Lamp, Signal Strength Lamp

Type	Key indicators	causality
mechanical property	Product Model:	DZ-COM1000-5.8G/5KM	POE Power:	24V 1A
	DC：	8V~24V	Maximum overall power consumption:	<10W
	Surge testing:	differential mode：±2KV	Product Dimensions:	217mm100mm60mm
	Working humidity:	10%~90%RH non-condensing	Storing Humidity:	5%~90%RH non-condensing
	Working temperature:	-30℃-- +55℃	Storage temperature:	-40℃ -- +70℃
	Lightning protection:	4kV lightning protection, 15kV ESD protection	Dustproof and waterproof:	ABS Engineering plastic housing, IP65 rated dust and water resistant

5G wireless power	802. 11a	54M	17±2dBm	6M	19±2dBm
	802. 11n Ht20	MCS7	16±2dBm	MCS0	18±2dBm
	802. 11n Ht40	MCS7	15±2dBm	MCS0	17±2dBm
	802. 11n Ht80	MCS9	14±2dBm	MCS0	16±2dBm
5G Receiving Sensitivity	802. 11a	54M	-70dBm	1M	-92dBm
	802. 11n Ht20	MCS7	-68dBm	6M	-90dBm
	802. 11n Ht40	MCS7	-66dBm	MCS0	-88dBm
	802. 11n Ht80	MCS9	-58dBm	MCS0	-85dBm

Note: The panel is subject to the actual product schematic connection diagrams

distance

1KM

2KM

3KM

4KM

5KM

5.8G

Gigabit

5KM

2-3

Note:The above data is for reference,according to the site environment,the number of cameras can be more or less.

Parameters

◆Adopting industrial-grade overall chip solution,8M NorFash,64M memory;
◆High transmit power,5.8G external unidirectional antenna 12DBi,built-in power 19DBm;
◆Support AP/relay mode,support DHCP way/static configuration way to get IP address;
◆Fat and thin AP integration,support equipment local WEB management;
◆POE interface,support 24V non-standard POE power supply,DC power supply (interface support DC8V-24V);
◆ Camera distribution location to the monitoring center to form the angle less than 60 degrees,you can consider the point-to-multipoint,reduce the transmitting end of the bridge to reduce costs but the prerequisite to meet the angle and demand.

Technical Parameters

main characteristic	5G operating bands:	5180MHz-5805MHz	5G WIFI Transmission Protocol.	802. 11a/n/ac
	FLASH：	8MB	Programs:	MTK
	Built-in antenna:	Directional Flat Antenna, Gain: 14dBi	Maximum wireless rate:	900Mbps
	5G EVM：	802. 11a:≤-25dB; 802. 11n:≤-28dB; 802. 11ac:≤-32dB;
	Frequency bias:	±10ppm	Press the button:	reset button (press and hold for 6-10 seconds to restore factory default configuration)
	Interface:	LAN0/POE：10/100/1000Mbps；LAN1 ：10/100/1000Mbps
	Status Indicator:	Power Lamp, LAN1 Port Lamp, LAN2 Port Lamp, System Lamp, Signal Strength Lamp

Type	Key indicators	causality
mechanical property	Product Model:	DZ-COM1000-5.8G/5KM	POE Power:	24V 1A
	DC：	8V~24V	Maximum overall power consumption:	<10W
	Surge testing:	differential mode：±2KV	Product Dimensions:	217mm100mm60mm
	Working humidity:	10%~90%RH non-condensing	Storing Humidity:	5%~90%RH non-condensing
	Working temperature:	-30℃-- +55℃	Storage temperature:	-40℃ -- +70℃
	Lightning protection:	4kV lightning protection, 15kV ESD protection	Dustproof and waterproof:	ABS Engineering plastic housing, IP65 rated dust and water resistant

5G wireless power	802. 11a	54M	17±2dBm	6M	19±2dBm
	802. 11n Ht20	MCS7	16±2dBm	MCS0	18±2dBm
	802. 11n Ht40	MCS7	15±2dBm	MCS0	17±2dBm
	802. 11n Ht80	MCS9	14±2dBm	MCS0	16±2dBm
5G Receiving Sensitivity	802. 11a	54M	-70dBm	1M	-92dBm
	802. 11n Ht20	MCS7	-68dBm	6M	-90dBm
	802. 11n Ht40	MCS7	-66dBm	MCS0	-88dBm
	802. 11n Ht80	MCS9	-58dBm	MCS0	-85dBm